NT series robots designed for the cleanroom application can reach up to four FOUP, the NT420 double arm robot provides standard performance of 280 wafers per hour (WPH) with aligner and 400 WPH without aligner. The software and hardware are equipped with collision detection functions and comply with the SEMI F47 voltage exoneration standards and SEMI S2 environmental, health and safety standards.
Controller D
D controllers are designed to develop cleanroom applications comprising a complete digital servo process, standard Ethernet communication port, compact footprint, flexible development of different software, independent operation of two arms and multi-axis controls, uniform servo amplifiers for all axes, standards environmental, health and safety SEMI S2, ISO 1 white room.
Specifications of the D60 controller
- Servo complete digital system
- Controlled Axes: Maximum 7 axes
- Manual, semi-automatic, fully automatic teaching.
- External emergency stop, near security, external stop.
- Hardware: RS232C x 1 Ethernet.
- Software: K-Utility (original Kawasaki communication command for clean robots).
- Energy: Voltage: Single-phase, AC208 V ± 10%, 50/60 Hz. Standard: SEMI F47.
- Input signal: Maximum 16 channels.
- Output signal: Maximum of 8 channels
- Compatible robots series: NS, NT, NX, TT, TX and NV
Specification of the D61 controller
- Servo complete digital system
- Controlled Axes: Maximum 12 axes
- Manual, semi-automatic, fully automatic teaching.
- External emergency stop, near security, external stop.
- Hardware: RS232C x 2 Ethernet.
- Software: K-Utility (original Kawasaki communication command for clean robots).
- Energy: Voltage: Single-phase, AC208 V ± 10%, 50/60 Hz. Standard: SEMI F47.
- Input signal: Maximum 96 channels
- Output signal: Maximum of 80 channels
- Compatible robots series: NS, NT, NX, TT, TX and NV
Main specifications
Number of axis: 5
Maximum l reach: 1,280 mm
Repeatability: ± 0.1 mm (wafer center)
Controller: D60/D61
Motion range (°)
θ1 axis (rotation JT2): 340°
Z axis (up-down JT3): 400 mm
θ2 axis (rotation JT4): 340°
H1 axis (rotation JT6): 340° (380°) como opción
H2 axis (rotation JT7): 340°
Robot applications
Cleanroom