ABB IRB 1200-7/0.7 Next Generation with OmniCore controller is a next-generation compact 6-axis articulated robot from the IRB 1200 Next Generation family. This variant is configured for a rated payload of 7 kg, a maximum reach of 700 mm and 6 controlled axes.
The IRB 1200 Next Generation is ABB’s updated compact robot family with improved speed, path performance and payload options for assembly, dispensing, polishing and high-end process applications.
The Next Generation configuration should be selected against the exact payload, tool center of gravity, inertia, mounting position and process environment. The stated wrist payload is a nominal value and the final usable load must always be validated with ABB load data and the complete end-effector design.
Controller compatibility: this record is grouped in the CMS under OmniCore. The compatible controller variants for this model are listed as OmniCore E10 / C30 / C90XT / V250XT. The final controller cabinet, RobotWare version, safety package, fieldbus options, additional axes and process software should be checked for the exact ABB order code.
Typical applications
- advanced manufacturing
- 3c electronics
- assembly of parts
- polishing
- glueing - adhesive bonding
- handling of parts
- loading and unloading of parts
For a Eurobots project, ABB IRB 1200-7/0.7 Next Generation can be evaluated for new automation cells, refurbished robot projects, replacement studies, feasibility tests and controller-standardization work. Final engineering approval should be based on the exact ABB mechanical unit, environmental option, load diagram and OmniCore controller configuration.
Technical specifications
| Specification | Value |
|---|---|
| Robot model | IRB 1200-7/0.7 Next Generation |
| Robot family | IRB 1200 Next Generation |
| Robot type | next-generation compact 6-axis articulated robot |
| Controlled axes | 6 |
| Rated payload | 7 kg |
| Maximum reach | 700 mm |
| Positioning repeatability | pose 0.011 mm / path 0.03 mm |
| CMS controller group | OmniCore |
| Compatible OmniCore controllers | OmniCore E10 / C30 / C90XT / V250XT |
| Mounting / installation | Any angle |
| Protection / environmental options | Std/option depends on variant; IP67 and clean/hygienic options available |
| Configuration represented | Next Generation |
| Main applications | Advanced Manufacturing, 3C Electronics, Assembly of parts, Polishing, Glueing - Adhesive bonding, Handling of parts, Loading and unloading of parts, Measurement |
| Engineering note | Validate the exact ABB variant, RobotWare release, load diagram, environmental package, mounting arrangement and controller options before ordering or integration. |
Source note: Payload, reach, axes, repeatability, mounting and OmniCore controller compatibility were curated from ABB Robotics product pages, ABB Robotics product range data and ABB product/datasheet documentation. Values can vary by exact variant and selected options.
Applications
Loading and unloading of parts , Handling of parts , Polishing , Measurement , Assembly of parts , Glueing - Adhesive bonding , 3C Electronics , Advanced Manufacturing
